Optional settings – BT 1000 User Manual

Page 28

Optional settings

To switch off the handset ringer

When the handset is in standby mode or placed on the
charger unit or base station, you can turn off the handset
ringer.

• Press and hold the

VOLUME DOWN

button on the side

of the handset until the display shows the word

SILENT.

• To turn the ringer back on, press and hold the

VOLUME

DOWN

button until

SILENT disappears.

To adjust the dial delay
The dial delay can be set to short, medium or long. The
dial delay is the time taken by the phone to send a
number to the exchange after dialling. The factory
setting is medium.

• Press the ➔ button until display shows

SET UP.

• Press the ✔ button. Display shows

HANDSET.

• Press the ➔ button. Display shows

BASE.

• Press the ✔ button. Display shows

SECURITY PIN.

• Press the ➔ button until the display shows

DIAL DELAY.

• Press the ✔ button. Display shows current

If you stop any procedure before it is completed, your
Synergy Handset will revert to standby after 20 seconds.