Philips 4 HD HIFI SMALL CLOCK VCR User Manual

Page 21

• Although the remote control that

comes with your VCR will work most
Cable Boxes and Satellite Systems, it
is possible that the remote control will
not operate your Cable Box or
Satellite System.

• The remote control may only operate

some features of your Cable Box or
Satellite System. For example, some
Cable Boxes may only be turned on
at the Cable Box, therefore the
remote control will not be able to
turn on the Cable Box.

• If you can not change the channels

at the Cable Box by using the
Number buttons, press the VCR
PLUS+/ENTER button after you
press the Number buttons. It may
change channels at the Cable Box.

• If you had to program the remote

control to operate your Cable Box or
Satellite System here, whenever you
replace the batteries in the remote
control, you will have to program the
remote control again.

Helpful Hints

HAMLIN . . . . . . . . .21, 22
JERROLD . . . .01, 02, 03,

. . . . . . . . .04, 05, 06, 07

OAK . . . . . . . . .16, 17, 18
PANASONIC . . . . .19, 20

PIONEER . . . . . . . .11, 12
SCIENTIFIC
ATLANTA . . . . .08, 09, 10
TOCOM . . . . . .23, 24, 25
ZENITH . . . . . .13, 14, 15

Setting the Remote to Operate a Cable Box/Digital Satellite System 21

Within 30 seconds after releasing the MUTE button, press and
release the CBL/DSS button.

Press and release the MUTE button.

Within 30 seconds after releasing the CBL/DSS button, use the
Number buttons to enter the two-digit code for your Cable
Box or Satellite System. For example, if you have a Zenith Cable
Box, press Number buttons 1, 3.

Your VCR remote control may operate your Cable Box or
Digital Satellite System. If the remote control doesn’t operate
your Cable Box or Satellite System now, follow the steps below
to program your remote control.

Point the remote control at your Cable Box or Satellite System and
press the CBL/DSS button. Then, press the POWER but-
ton. If your Cable Box or Satellite System turns on or off, try the
other Cable Box/Satellite System buttons (see pages 22 - 24 for
details). If your Cable Box or Satellite System doesn’t turn on or off,
or if the other buttons don’t work, go to step 2.

Find the brand of your Cable Box or Satellite System on
the list below, and remember the two-digit number to
the right of it.

Try step 1 again. If the remote control works your Cable Box
or Satellite System, you’re finished. If the remote control still
doesn’t work your Cable Box or Satellite System, repeat steps 2 -
5, using a different code.

There is no guarantee that the

remote control will work your

Cable Box or Satellite System.

CABLE BOX CODES

MAGNAVOX . . . . .26, 27

RCA . . . . . . . . . . . . . .28

SATELLITE SYSTEM CODES

1&6 2

Find your
cable box
code or
satellite
system
code.

+100

POWER

EJECT

SLOW

PAUSE/STILL

STATUS/EXIT

CLEAR

SPEED

REC/OTR

VCR

CBL/DSS

MUTE

VOLUME

CHANNEL

VAR. SLOW

VCR/TV

TIME

VCR PLUS+

/ENTER

JOG&

SHUTTLE

MEMORY

PLAY

REW

–

STOP

F.FWD