Philips Clock Radio AJ3600 - Manual (Page 11)

• The brightness of the display can be adjusted:
Bright ¬ Medium ¬ Low ¬ Bright (when AC-powered)
Low ¬ Bright ¬ Low ¬ Bright (when battery-powered)
Helpful hints:
–
When battery-powered, the display illumination is default low to help save ener-
gy. Any other use of the BRIGHTNESS CONTROL for a brighter display
adjustment will therefore be effectively limited.
SETTING THE CLOCK
The time is displayed using the 12-hour clock.
1. Check the radio is switched off.
2. Press SET TIME to enter the clock setting mode.
3. Hold down or press HOUR + or MINUTE + repeatedly to set and
adjust the hours and minutes respectively. Release HOUR + or
MINUTE + when you have reached the correct setting.
4. Press SET TIME to confirm.
RADIO
1 Press RADIO ON/OFF once to switch on the radio.
2 Press BAND if you wish to change waveband.
3 Adjust the sound using VOLUME.
4 Press RADIO ON/OFF to switch off.
Helpful hints:
– In standby clock time, to view the current radio frequency,
•
Press RADIO ON/OFF once or more;
• For preset stations, press the respective PRESET button (1-5) once or repeatedly.
TUNING TO RADIO STATONS
Automatic tuning
• Press
TUNING +/- one second or more to tune to your station.
™The radio automatically tunes to a station of sufficient reception.
Manual tuning
• Press
TUNING +/- briefly or repeatedly until you reach the desired
frequency