Philips MCD288-37 - Manual (Page 18)

18
English
Installation
Using the VCR for recording DVDs
AUDIO IN
L
R
VIDEO IN
VCR
1
Connect the end of the supplied AV cord with
only one connector to the A/V OUT jack of
the DVD system.
2
For the other end, connect the video output
connector (yellow) to the VIDEO IN jack on the
VCR and the audio connectors (white/ red) to
the corresponding audio input jacks on the VCR.
This will allow you to make analogue stereo
(two channel, right and left) recordings.
Step 5: Connecting the power
cord
After everything is connected properly,
plug in the AC power cord to the power
outlet.
Never make or change any connection with the
power switched on.
Optional: Connecting additional
equipment
Listening to the playback of a non-USB
device
AUDIO OUT
L R
VCR
(for example)
●
Connect the system's AUX-IN jack to the
AUDIO OUT jacks on another audio/visual
device (such as a VCR, Laser Disc player or
cassette desk) using a "single-to-double" cinch
cable (with one end providing a 3.5" connector
for connection to the AUX-IN jack while the
other end providing two white/red connectors
for connection to the other device's AUDIO
OUT jacks).
pg001-pg025_MCD288-37-Eng-A 2006.3.15, 16:50 18