Philips 107P40-99 User Manual
Page 91
4) Press the
or
button to highlight 9300K for GENERAL USE, 6500K for IMAGE MANAGEMENT,
5500K for PHOTO RETOUCH, or USER PRESET.
5) Once you have highlighted GENERAL USE, IMAGE MANAGEMENT, or PHOTO RETOUCH, press the
button to confirm you selection and return to the MAIN CONTROLS window. CLOSE MAIN
CONTROLS will be highlighted.
6a) If USER PRESET is highlighted, press the
button to highlight RED. Next, press the
or
button to adjust the color red.
6b) When finished with RED, press the
button to highlight GREEN. Next, press the
or
button
to adjust the color green.
6c) When finished GREEN, press the
button to highlight BLUE. Next, press the
or
button to
adjust the color blue.
6d) When all adjustments are complete, press the
button to confirm your adjustments and return to the
MAIN CONTROLS window. CLOSE MAIN CONTROLS will be highlighted.
Smart
Help
After returning to MAIN CONTROLS. . .
. . . to continue to RESET TO FACTORY SETTINGS, press the
button until
RESET TO FACTORY SETTINGS is highlighted. Next, start with step 3 under RESET
TO FACTORY SETTINGS.
. . . to exit completely, press the
button.
The OSD Controls
file:///D|/EDFU/crt_17/edoc/english/OSD/osd_cont.htm (17 of 25) [6/25/2003 10:10:06 AM]