Philips 107P40-99 - Manual (Page 85)

7) To adjust the balanced pincushion, press the or button.
8) When the balanced pincushion is adjusted, press the button to return to the ADJUST SHAPE
window. BACK TO MAIN WINDOWS will be highlighted.
9) Press the button to return to the MAIN CONTROLS window, or press the button until ADJUST
SIDE ANGLES is highlighted.
Smart
Help
After returning to MAIN CONTROLS . . .
...to continue to ADJUST SIDE ANGLES, start with step 5 under ADJUST SIDE
ANGLES and follow the directions.
...to exit completely, press the button twice.
...to adjust only the BALANCED pincushion, follow steps 1 - 4 above, then press the
button, and follow steps 7 - 9.
ADJUST SIDE ANGLES
ADJUST SIDE ANGLES under ADJUST SHAPE allows you to adjust two of the five preset options. These
two options are TRAPEZOID and PARALLELOGRAM. Note: use these features only when the picture is not
square.
1) Press the button on the monitor. The MAIN CONTROLS window appears.
2) Press the button until ADJUST SHAPE is highlighted.
The OSD Controls
file:///D|/EDFU/crt_17/edoc/english/OSD/osd_cont.htm (11 of 25) [6/25/2003 10:10:05 AM]