Philips DS8800W-37 - Manual (Page 12)

13
English
Connect the unit to a Wi-Fi
QHWZRUN URXWHU
Select a scenario below that matches your
router type.
Note
‡ Each time when the unit is powered on again, the
XQLW HQWHUV WKH ODWHVW FRQÀJXUHG :L)L QHWZRUN
automatically.
‡ In case of setup failure, repeat the steps, or press and
hold on the front of the main unit and try again.
Scenario 1: Connect to a WPS-PBC
router
1
Press WI-FI SETUP on the back of the
main unit.
» The indicator blinks in red, green, and
yellow alternately.
2
Press the WPS button on the wireless
router.
» After a while, the indicator stops
blinking and stays green, and the
speaker beeps.
» The unit joins the Wi-Fi network
successfully.
WIFI
SETUP
WI-FI SETUP
4 Set up a Wi-
Fi network for
AirPlay
Note
‡ Some operations may vary as you use different types of
wireless routers.
The unit is compatible with the following iPod/
iPhone/iPad models:
‡
iPod touch (2nd, 3rd, and 4th generation)
‡ iPhone 4
‡ iPhone 3GS
‡ iPad 2
‡ iPad
Before setup of the Wi-Fi network, check
the points below.
1
Make sure that the wireless router is
powered on and working properly.
2
Make sure that the indicator on the front
of the main unit blinks in green slowly.
3
Check the type of the wireless router you
use.
EN