Philips flat HDTV 32PF7320A 32" LCD digital cable ready with Pixel Plus User Manual
Page 17
15
Note: Emergency Alert Signalling is not possible:
- when content browsing;
- with analogue video sources.
Notes:
- You always have the possibility to remove the message
from the screen.
- The message display will overlap whatever menu
element or other message is on the screen.
Important: you have forgotten your PIN!
&
Select
Change PIN
in the Menu preferences
menu and press the cursor right.
é
Press the cursor right to enter the overriding
PIN code
0-7-1-1
.
“
Press the cursor again and enter a new personal
4-digit PIN code.The previous code is erased an
the new PIN-code is stored.
Menu preferences
OSD
&
Select
OSD
.
é
Press the cursor right to select
Normal
or
Minimum
.
Normal
to activate the continuous display of the channel number (for max.
10 minutes) and extended display of TV channel and program information
on screen. E.g. information on the main or auxiliary program, input signal
quality of connected accessory devices, the display format, sound mode,
availability of Closed Caption service, the audio language, the rating,
sleeptimer setup.
Minimum
to activate the display of reduced channel information.
Note: When Closed Captions is switched on, continuous display of the channel
number and clock is not possible.
Show emergency alerts (EAS)
This allows you to select the alert priority level of the information
disseminated by the cable operator.The standard SCTE18 defines an
Emergency Alert signalling method for use by cable TV systems to signal
emergencies to digital devices such as digital set-top boxes, digital TVs and
digital VCRs.
The Emergency alert signalling scheme defined in the standard allows a
cable operator to disseminate emergency alert information related to state
and local-level emergencies and warnings in a cost-effective and efficient
way, while minimizing disruption of programming.
An Emergency alert message will have one of the following priorities:
Low
,
Medium
,
High
or
Maximum
.
The Emergency alert message with priority
High
or
Maximum
will always
be presented.
Low
or
Medium
will be present or ignored depending on
the selected setting.
Important: When the TV clock is undefined (See Setup menu, Clock, p. 17), the
Emergency Alerts will be ignored.
The Emergency Alert message display will contain following information:
- The Emergency Alert text
- The start time + date
- The end time + date.
&
Select
Show Emergency Alerts
in the Menu preferences menu.
é
Press the cursor right and select one of the Emergency alerts options:
- Always, when you always want the Emergency alert messages to be
displayed when available;
- Skip low priority, when you want the messages with low level to be
ignored;
- Skip low/medium priority, when you only want the messages with high
priority to be displayed.
Set/Change PIN
&
Select
Set
or
Change PIN
with the cursor down.
é
If no PIN-code exists yet, the menu item is set to
Set PIN
. Follow the
instructions on screen.
If a PIN-code has previously been entered, the menu item is set to
Change
PIN
. Follow the instructions on screen.
All number combinations from 0000 tot 9999 are valid numbers.
“
The
Menu preferences menu
reappears with a message confirming that
the PIN has been created.
Reset AV settings
This function allows you to reset most of the picture and sound settings to
their predefined factory states.
&
Select
Reset AV settings
with the cursor down.
é
Press the cursor right.
“
Press the
OK
button to erase settings and reset them to their default
values.