Philips flat HDTV 32PF7320A 32" LCD digital cable ready with Pixel Plus - Manual (Page 14)

This menu is used to control the settings of special TV functions, features and
accessory devices.
The Preferences menu allows you to change settings that will typically be
accessed only occasionally.
The Source menu allows you to select a source.
The Clock menu allows you to use your TV as a clock.This setup is necessary
for the correct working of the Lock after feature.
Preferences
& Press the MENU button.
é Select Setup with the cursor down and press the cursor right to select the
Preferences menu.
“ Press the cursor right again to select Picture/sound preferences .
‘ Press the cursor right once more to enter the Picture/sound preferences
menu.
Picture/sound preferences
PIP format
This menu allows you to select the preferred format (PIP or Dual screen)
which can then be displayed toggling the
PIP button on the remote control
On or Off .
& Select PIP format .
é Press the cursor right.
“ Select PIP or Dual screen with the cursor up/down.
Now, when the PIP button on the remote control is pressed and when
- PIP is selected, the TV shows a full screen of video with a pip window of
video on top of it.
- Dual screen is selected, the TV splits the screen into two equally sized
screens.
‘ Press the cursor left/right to highlight the PIP window or the left/right
screen in Dual screen.
( Press the -CH/PAGE+ button to change the broadcast channel or the AV+
button to change the HDMI source in the highlighted screen.
Note: Audio only plays from the main, when PIP has been selected, or the left
screen, when Dual screen has been selected.
Define the position of the PIP screen
& Press the cursor right to highlight the PIP screen.
é Press the red color button on the remote control to select Position .
Note: If no action has been undertaken, the function buttons at the bottom of the
screen will disappear after a few seconds.
“ Use the cursor keys to define the position of the PIP screen.
Auto surround
Sometimes the broadcaster transmits special signals for Surround sound
encoded programs.The TV automatically switches to the best surround
sound mode when
Auto surround is switched On .
12
Notes: PIP format:
PC formats via HDMI will always be displayed full
screen.
Remind:
Dual screen/PIP functionality, also called HDMI PIP, is a function used to watch a
broadcast and a HDMI source simultaneously.
• A broadcast can be analog or digital, cable or antenna.
• An external HDMI device (DVD, DVD-R, Set Top Box, A/V receiver,...) must be
connected to HDMI1 or HDMI2.
Setup menu