4 group/bus banks – Behringer 32-Channel User Manual

Page 15

X32 DIGITAL MIXER Preliminary User Manual

2.4 Group/Bus Banks

(28)

GROUP/BUS LAYERS – Select between DCA groups 1-8, Buses 1-8 or 9-16,

or Matrices 1-6 and the main center bus with these buttons. The currently

active layer will light.

(29)

SENDS ON FADERS – Press this button to activate the Sends on Faders

function. See the Topic Guide for more details.

(30)

SELECT – Press this button to select a DCA or bus (depending which layer

is active) and allow it to be edited by the Channel Strip and Main Display.

(31)

GROUP/BUS METER – This displays the signal level of the DCA or bus

(depending which layer is active). The Pre LED indicates that the bus is

sourced pre-fader, while the Comp LED indicates that compression is active.

(32)

SOLO – Press this button to solo the DCA or bus.

(33)

MINI DISPLAY – Information such as matrix/bus number,

nickname, input source and graphical icon are displayed on this color

LCD screen.

(34)

MUTE – Press this button to mute the DCA or bus.

(35)

FADER – Use this to adjust the bus level. The faders will automatically

display the current status as layers and functions are changed.

(36)

MAIN SELECT – Press this button to select the main bus for editing.

(37)

CLEAR SOLO – Press this button to release all sources assigned to the

solo bus.

(38)

MAIN SOLO – Press this button to solo the main bus.

(39)

MAIN MUTE – Press this button to mute the main bus.

(40)

MAIN FADER – This fader adjusts the output of the main bus.