Philips MX5900SA-37B - Manual (Page 35)

35
English
DVD Menu Options
Setting the analog output
Set Analog Output to match your DVD
home cinema system’s playback capability.
This function can also be accessed via the
SURR. button on the remote control (or
SURROUND on the front panel.)
Follow the steps of “Using the Setup
Menu” and select :
> Analog Output
Digital output
Analog output
Night mode
Karaoke vocal
Speakers
Stereo
3D sound
Multi-channel
1en 1en st 1
Speaker layout
PCM output
Stereo
Select this to change channel output to
stereo which delivers sound from only
the two front speakers and subwoofer.
3D Sound
Select this to change channel output to
3D sound which delivers surround sound
from only the two front speakers and
subwoofer.
Multi-channel
Select this to enable Multi-channel
output.
Night mode – turning on / off
Follow the steps of “Using the Setup
Menu” and select :
> Night Mode
Digital output
Analog output
Night mode
Karaoke vocal
Speakers
On
Off
1en 1en st 1
Speaker layout
PCM output
Off
Select this when you want to enjoy the
surround sound with its full dynamic
range.
On
Select this to level out the volume.
High volume outputs will be softened and
low volume outputs are brought upward
to an audible level. This feature is only
available for movies with Dolby Digital
mode.
Karaoke vocal – turning on / off
Follow the steps of “Using the Setup
Menu” and select :
> Karaoke vocal
Digital output
Analog output
Night mode
Karaoke vocal
Speakers
On
Off
1en 1en st 1
Speaker layout
PCM output
Off
Select this to turn off karaoke vocal
function.
On
Select this when a multi-channel karaoke
DVD is being played. The karaoke
channels on the disc will then be mixed
into a normal stereo sound; allowing you
to hear both the lyrics and music
together.