Philips 170W4P7499 - Manual (Page 55)

Note: If you use an Apple
Macintosh TM , you need to
connect the special Mac
adapter to one end of the
monitor signal cable.
3) Connect to PC
(a) Turn off your computer and unplug its power cable.
(b) Connect the monitor signal cable to the video connector on the back of your
computer.
(c) Plug the power cord of your computer and your monitor into a nearby outlet.
(d) Turn on your computer and monitor. If the monitor displays an image,
installation is complete.
Connecting to Your PC
file:///D|/K1/english/170w4p/install/connect.htm (3 of 4) [3/26/2003 10:53:18 AM]