Philips DVDR3390-37 - Manual (Page 37)

English
37
Editing/Finalizing Recording
(continued)
Rename disc
The original disc name is generated
automatically by the recorder. You
can change the disc name by following
the steps below.
A
Press TOP MENU, then use ST keys
to select { Rename Disc } and press OK.
The keyboard screen appears.
B
Use W XST keys to highlight a
character on the keyboard and press OK
to select.
The maximum input is up to 9
characters.
You can use the following keys on the
keyboard screen to edit your input:
BkSp : to remove a character to the
left of the cursor.
Delete : to remove the character to
the right of the cursor.
Space : to create a space between
characters.
Caps : to toggle between upper and
lower case characters.
Clear : to clear the entry fi eld
completely.
C
To confi rm your entry, select OK on
the keyboard and press OK.
The info panel is now updated.
To cancel the changes, select EXIT on
the keyboard and press OK.
Erase disc (DVD±RW only)
This erases the content of the DVD±RW
including those that was not recorded on
this recorder. Once the existing content
is erased, it can be used again for
recording.
A
Press TOP MENU, then use ST keys
to select { Erase Disc } and press OK.
A warning message will appear.
B
Select YES in the menu to proceed or
NO to abort. Press OK to confi rm.
Record new title
This function allows you to start a new
recording at the remaining empty space
on the DVD±R/±RW.
A
Press TOP MENU, then use ST keys
to select { Record New Title } and
press OK.
B
Select the source you want to record
from and press REC to start
recording.
Overwrite disc (DVD±RW only)
This function allows you to start a new
recording from the beginning of a
DVD±RW regardless of the contents of
the disc.
A
Press TOP MENU, then use ST keys
to select { Overwrite disc } and press
OK.
B
Select the source you want to record
from and press REC to start
recording.
TIPS: No further recording and editing can be carried out on a full or fi nalized DVD±R.
Press
W to go back to the previous menu. Press DISC MENU to exit.