Philips DVDR3390-37 - Manual (Page 18)

English
18
Step 2: Optional Connections
R
L
Y
P B
P R
VIDEO (CVBS)
COMPONENT
VIDEO
EXT 2
S-VIDEO (Y/C)
VIDEO (CVBS)
S-VIDEO (Y/C) AUDIO
COAXIAL
R
L
R
L
(DIGITAL AUDIO)
INPUT OUTPUT EXT 1
AUDIO
TV-OUT ANTENNA-IN
CABLE SATELLITE ANTENNA
AUDIO IN
R L VIDEO
IN
TO TV
ANT IN
CH3 CH4
TV
TV has only an antenna input
jack
Use this connection if your TV has only a
single Antenna In jack (or labeled as
75 ohm or RF In) and does not have any
audio/video jacks.
For this type of connection, you
need an RF modulator in order to
view the disc playback.
A
You may have an Antenna/Cable TV
signal (or from the Cable Box/Satellite
Receiver/VCR) connected to your TV’s
antenna input jack (VHF/UHF RF IN.)
Remove it from the TV and connect it to
the ANTENNA-IN
jack on the
recorder.
B
Use the supplied RF coaxial cable to
connect the TV-OUT jack on the
recorder to the antenna input jack on the
RF modulator.
C
Use a RF coaxial cable (not supplied) to
connect the TO TV jack on the RF
modulator to the antenna input jack on
your TV.
D
Use the supplied AV cables (yellow plug)
to connect the VIDEO (CVBS) -
OUTPUT jack on the recorder to the
video input jack (or labeled as A/V In,
Video In, Composite or Baseband) on the
RF modulator.
E
Use the supplied AV cables (red/white
plugs) to connect the AUDIO
OUTPUT jacks on the recorder to the
audio input jack (or labeled as AUDIO IN
or LINE IN) on the RF modulator.
Helpful Hints:
– If you have used the TV-OUT
jack to
connect your recorder to TV, set your TV to
channel 3 or 4. If you have used VIDEO/
AUDIO OUTPUT connection, set the TV to
the appropriate video input channel.
– See your electronics retailer for details on
RF modulator availability and operations.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
A
B
C
D
E
Rear of an RF
Modulator
(Example only)