Philips DVDR3390-37 - Manual (Page 16)

English
16
Step 1: Basic Recorder Connections
(continued)
Connecting the video cable
This connection allows you to view the
disc playback from the recorder. You
only need to choose one of the options
below to make your video connection.
Option 1: Using a Video (CVBS)
cable
Use the supplied audio/video cables
(yellow plug) to connect the VIDEO
(CVBS) OUTPUT jack on the
recorder to the video input jack (or
labeled as A/V In, Video In or Composite)
on the TV.
Option 2: Using an S-Video cable
Use an S-video cable (not supplied) to
connect the S-VIDEO (Y/C)
OUTPUT jack on the recorder to the
S-Video input jack (or labeled as Y/C or
S-VHS) on the TV.
Option 3: Using a Component
Video cable
A
Use the component video cables (red/
blue/green - not supplied) to connect the
Y P
B P R OUTPUT jacks on the
recorder to the corresponding
component video input jacks (or labeled
as Y Pb/Cb Pr/Cr or YUV) on the TV.
B
If your TV accepts Progressive Scan
signal, see the section “GENERAL
settings – Progressive Scan” for detailed
set up.
IMPORTANT!
The progressive scan video quality is
only available through Y P
B P R
connection and a progressive TV is
required. It is strongly advised to
complete the recorder installation
fi rst, before enabling the
progressive scan feature.
R
L
Y
PB
PR
VIDEO (CVBS)
COMPONENT
VIDEO
EXT 2
S-VIDEO (Y/C)
VIDEO (CVBS)
S-VIDEO (Y/C) AUDIO
COAXIAL
R
L
R
L
(DIGITAL AUDIO)
INPUT OUTPUT EXT 1
AUDIO
TV-OUT ANTENNA-IN
AU D IO O U T S-V ID E O IN
V ID E O IN
TV
OR
Option 2
Option 3
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
OR
Option 1