Vitek VT-3109 SR - Manual (Page 3)

ENGLISH
Radio Cassette Recorder
PRECAUTIONS
• Never open the cabinet under any
circumstances. Never operate this product
with the cabinet removed. Any repairs of
internal adjustments should be made only
by a trained service technician.
• Do not touch the recorder with wet hands. If
any liquid enters the recorder cabinet, take
the recorder to a trained service technician
for inspection.
Location of controls
. HEADPHONES Jack
2. PAUSE Button
. STOP/EJ (Stop/Eject) Button
4. FF (Fast Forward) Button
5. REW (Rewind) Button
6. PLAY Button
7. REC (Record) Button
8. Tuning Scale
9. BAND Selector (LW/MW/FM)
0. MIC (microphone)Button
. FUNCTION Selector TAPE/RADIO
2. VOLUME Control
. Battery Compartment
4. TUNING Control
5. AC IN Jack
Preparation for use
Please keep this instruction for future reference.
AC Power Operation
For this unit, the AC plug adaptor is provided. If
required, use it.
Connection of AC Power cord
Connect one end of the supplied AC power cord
to the AC IN jack, and the other end, to house-
hold AC outlet.
Notes:
• When you do not use the unit for a long
period of time, be sure to unplug the unit
from the AC outlet.
• Even if batteries are loaded, the unit
switches over to AC power whenever you
plug it into an AC power source.
DC Power Operation
Open the battery compartment and install four
(“D” size, HP2, R20) with + and - poles facing in
the correct directions as indicated in the battery
compartment.
Notes:
Incorrect using the batteries can cause their
leakage or burst, and may damage the unit.
Note the following:
• Do not mix old and new batteries.
• Remove the batteries when you do not plan
to use the unit for a month or more.
Radio Operation
. Set the FUNCTION selector to RADIO.
2. Set the BAND selector to the desired band.
. Tune to the desired station by using the
TUNING control.
4. Adjust the VOLUME control to your
comfortable listening level.
5. To turn the radio off, set the FUNCTION
selector to OFF.
Notes:
• For FM reception, extend the telescopic
antenna and turn its direction at which the
reception becomes optimal.
• For AM reception, a ferrite bar antenna
is built-in. Since this antenna is direction
oriented, turn the entire unit to a direction at
which the reception becomes optimal.
Cassette playback
. Press the STOP/EJ button to open the
cassette compartment door. Insert the
cassette with the exposed portion facing
upward.
2. Close the cassette compartment door by
hand.
. Set the FUNCTION selector to TAPE.
4. Press the PLAY button.
5. Adjust the VOLUME control to your
comfortable listening level.
6. To stop the tape, press the STOP/EJ button.
7. To eject the cassette, press the STOP/EJ
button again.
Fast Forward and Rewind
. Press the FF button to rapidly advance the
The lightning bolt in a triangle symbol indicates to the
user that there are dangerous voltages inside the device
that can result in electrical shock.
The exclamation point in a triangle symbol indicates to
the user important operating instructions and technical
service information in the accompanying literature.
Indicates a device using a laser. This symbol
must be located on the rear panel of a
device, indicating that the device contains a
Class laser and that laser rays are in use.
The possibility of laser exposure does not
exist without opening the device.
CLASS 1
LASER PRODUCT
CAUTION
Risk of electric shock
DO NOT OPEN
WARNING: In order to reduce the risk of fire or electrical shock,
do not remove the device panels. Contact qualified personnel for
service and repairs.
3109IM.indd 3 30.01.2007 14:59:25