beautypg.com

Troubleshooting – Philips HTS8100-37B User Manual

Page 49

background image

49

English

Troubleshooting

WARNING
Under no circumstances should you try to repair this unit yourself, as this will
invalidate the warranty. Do not open this unit as there is a risk of electric shock.

If a fault occurs, fi rst check the points listed below before taking this unit for repair. If
you are unable to solve a problem by following these instructions, consult your dealer or
Philips for help.

No power.

No picture.

Completely distorted picture
or black/white picture.

No sound or distorted sound.

No surround sound effect
from the speakers.

The remote control does not
function properly.

– Press STANDBY-ON on the unit to turn on the

power.

– Ensure that the interconnect cable between the

subwoofer and main unit are connected.

– Refer to your TVs manual for correct Video In

channel selection. Change the TV channel until you
see the DVD screen.

– Press DISC to select disc mode.
– If this happens when you turn on the progressive scan

feature or change the HDMI video setting, wait for 15
seconds for the auto recovery or switch back to the
default mode as below:

1) Press OPEN/CLOSE to open the disc compartment.
2) Press cursor left key on the remote control.
3) Press AUDIO on the remote control.

– Check the video connection.
– Sometimes a small amount of picture distortion may

appear. This is not a malfunction.

– The disc is dirty. Clean the disc.

– Adjust the volume.
– Check the speaker connections and settings.
– Make sure that the audio cables are connected and

press SOURCE to select the correct input source (for
example, TV or AUX) to choose the device that you
want to hear through this unit.

– Press AMBISOUND to select a correct surround

sound setting.

– Make sure that the source you are playing is recorded

or broadcast in surround sound (DTS, Dolby Digital,
etc.).

– Select the source you want to play (for example,

DISC or RADIO) before pressing the function button
(X, ./ >.)

– Reduce the distance between the remote control and

this unit.

– Batteries are weak, replace the batteries.

Problem

(General)

Solution

This manual is related to the following products: