Philips HTS8100-37B - Manual (Page 41)

41
English Adv Picture
It provides the picture settings to enhance the appearance and
picture quality for disc playback.
Note: { DCDi }, {True Life } and { P-Scan Format } settings are only
applicable for Progressive Scan output.
{ DCDi } – Directional Correlation Deinterlacing. It is
known by its smooth video content as it fi lls
the missing lines.
{ On }
Optimise the picture quality signifi cantly, especially
during the slow motion play.
{ Off }
Turn off the DCDi function.
{ Gamma } – Adjust the intensity of the picture non-
linearly (-7 to +7). A positive value enables
you to bring out low level detail in dark
scenes, while a negative value emphasizes
contrast.
{ Chroma Delay } – Adjust the advance delay of chroma signal
to produce a perfect clear picture (-3 to +3.)
{ True Life } – Increase the contrast and colour intensity to
produce a more dynamic picture (00 to 05.)
{ HDMI Video }– Select a suitable video resolution depending
on the capability of the connected TV/device
to further enhance the HDMI video output.
{ 480p }
Progressive output in 480 lines for NTSC TV.
{ 576p }
Progressive output in 576 lines for PAL TV.
{ 720p } - (if a HDMI TV is connected)
Progressive output upscale to 720 lines.
{ 1080i } - (if a HDMI TV is connected)
Interlaced output upscale to 1080 lines.
{ 1080p } - (if a HDMI TV is connected)
Progressive output upscale to 1080 lines.
{ Auto }
The video output automatically follows the
display’s supported resolution.
Note: If no display appears on the TV due to
unsupported resolution, use the Composite Video
cable to connect this unit and your TV. Turn on
your TV to the correct video input channel and
adjust the resolution setting to 480p/576p.
Video Setup Page (underlined options are the factory default settings)
Setup Menu Options
(continued)