Philips 55PFL5907-F7 - Manual (Page 46)

English
46
HDMI-ARC connection
HDMI-ARC allows you to use EasyLink to output TV Audio directly to
a connected Audio device, without the need for an additional Digital
Audio cable.
OUT
HDMI-ARC
Digital home theater Digital home theater
amplifi er amplifi er HDMI cable HDMI cable
HDMI 1 IN only HDMI 1 IN only
Note
• The HDMI 1 connector is HDMI Audio Return Channel (ARC) compliant. Use it to
output Digital Audio to an HDMI home theater system.
• Be sure that the device is HDMI CEC and ARC compliant and that the TV is connected
to the device using an HDMI cable attached to HDMI-ARC connectors.
Component Analog Video Connection
Component Analog Video connection offers better picture quality for
video devices connected to the unit.
If you connect to the unit’s Component Video (Y/Pb/Pr) Input jacks,
connect Analog Audio cables to the Analog Audio (L/R) Input jacks.
OUT OUT
IN IN
IN IN
OUT OUT
Component Component
(Y/Pb/Pr) Video cables (Y/Pb/Pr) Video cables
Audio (L/R) cables Audio (L/R) cables
set-top box set-top box
or or
Blu-ray disc / DVD Blu-ray disc / DVD
recorder recorder
Component dongle Component dongle
Audio dongle Audio dongle
Note
• The unit accepts 480i / 480p / 720p and 1080i/p of video signals for this connection.
Composite Analog Video Connection
Composite Analog Video connection offers standard picture quality for
video devices connected to the unit.
If you connect to the unit’s Composite Video (Y/VIDEO) Input jack,
connect Audio cables to the Audio (L/R) Input jacks. When the Audio is
monaural, then only connect to the Audio L Input jack.
OUT
IN IN
DVD player DVD player
Audio (L/R) + Video cables Audio (L/R) + Video cables
Composite dongle Composite dongle
Note
• With this unit, Yellow cable must be connected to Y (Green) of Component Video Input
jacks.
• Whenever you connect to the Composite Video Input jack (Y/VIDEO), you must
disconnect the Component Video Input jacks (Pb and Pr). If you leave those jacks
connected, it may cause of unstable picture.
• Only the left loudspeaker reproduces sound for mono equipment. Use a mono to
stereo adapter (not supplied) for sound reproduction via all internal loudspeakers.
Connecting the TV to the Internet using an Ethernet cable
LAN
Network provisioning Network provisioning
equipment equipment
Ethernet cable Ethernet cable
Internet Internet
Note
• Please purchase shielded Ethernet cables at your local store and use them when you
connect to network equipment.
• After connecting an Ethernet cable, set up necessary network settings. Network ➠ p. 40
• Do not insert any cable other than an Ethernet cable to the Ethernet port to avoid
damaging the unit.
• If your telecommunications equipment (modem, etc.) does not have broadband router
functions, connect a broadband router.
• If your telecommunications equipment (modem, etc.) has broadband router functions
but there is no vacant port, use a hub.
• For a broadband router, use a router which supports 10BASE-T / 100BASE-TX.
• Do not connect your PC directly to the Ethernet port of this unit.
Continued on next page.