Philips 55PFL5907-F7 - Manual (Page 32)

English
32
Sound
Before you begin:
You must set Home in Location. ➠ p. 38
Otherwise, personalized picture and sound settings will not be
memorized after the unit goes into Standby mode.
1
Press (MENU) and use ▲▼◄► to select Setup, then press
OK.
2
Use ▲▼ to select Sound, then press OK.
Picture Auto sound Personal
Sound Equalizer Start now
Features Balance
Installation Digital audio language English
Software SRS TruSurround HD On
AVL Off
TV speakers On
Digital output format Multichannel
3
Use ▲▼◄► to select the item you want to adjust, then press
OK.
The following sound settings can be confi gured. Depending on the
format of the broadcasting, some sound settings are not available.
Auto sound
to select the desired setting
(Personal, Standard, Vivid, Sports, Movie, Music and
News)
When you adjust the following settings (Equalizer,
SRS TruSurround HD and AVL), Personal will be set
automatically.
Adjust the tonal quality for each frequency.
Equalizer
Cursor ◄ Cursor ►
to adjust the each level of tonal quality
Press BACK to go back to the previous menu.
Adjust the speakers to suit your listening preference.
Balance
Cursor ◄ Cursor ►
to adjust the balance of the right and left speakers
Digital TV operation
You can select the Audio language while your TV is receiving the Digital
broadcasting.
Digital audio
language
to select the language according to your preference.
(It differs depending on the program.)
Analog/Cable TV operation
You can select Main or SAP while your TV is receiving the Analog
broadcasting that has the SAP (Second Audio Program).
(It differs depending on the program.)
Alternate audio
Main to output main-audio
SAP to output second-audio program
Analog/Cable TV operation
When you set to Main in Alternate audio above, you can select Mono
or Stereo if the Analog broadcasting is sending the MTS (Multichannel
television sound).
Mono/Stereo
Mono to output mono-audio
Stereo to output stereo-audio
This selects sound modes for more spatial or surround sound
reproduction.
SRS TruSurround
HD
Off to set SRS TruSurround HD™ to Off
On to set SRS TruSurround HD™ to On
This function keeps a constant loudness differential between the TV
commercials and the programs.
AVL
Off to remove the auto volume leveling
On
to reduce volume differences between
the TV commercials and the programs
You can select the Audio Output from the unit’s speakers or not. If your
amplifi er is HDMI link function compatible and connected by an HDMI
cable to this unit, some sound operations such as volume up can be
changed by using this unit’s remote control. Make sure Master EasyLink
is set to On. ➠ p. 39
TV speakers
Off
not to output sound from the unit’s
speakers
On to output sound from the unit’s speakers
Speakers
EasyLink
to control Audio Output from your
connected EasyLink Compliant Devices
with + / − (VOLUME) by using this unit's
remote control.
You can set the digital audio output format from SPDIF/ARC.
Digital output
format
PCM to output PCM
Multichannel
to output Multichannel
(When the audio of the content is
PCM, it will be output in PCM even if
Multichannel is selected.)
If a channel or Input device is too loud or too soft, navigate to that
channel or Input device.
Delta volume
Cursor ◄ Cursor ►
to set a negative delta
volume level as per your
personal preferences
to set a positive delta
volume level as per your
personal preferences
Note
• Alternate audio and Mono/Stereo are not available when you watching TV programs
with a cable box or satellite set-top box connected through an HDMI cable or
Component / Composite Video cables.