Step 4, Step 5, Step 6 – Belkin F1DP108AEA User Manual

Page 21

Text mode
Original mode

Installation

Step 4

Connect the SMB CAT5 KVM Switch to the Server Interface Module using
the included Belkin CAT5e Patch Cable or other CAT5 cable. (Refer to
diagram below.)

Step 5

Power-up your server.

Step 6

Repeat Steps 1 through 5 for each additional PS/2 server you wish
to connect.

This manual is related to the following products:

F1DP116AEA F1DP104AEA