Philips HTS5100B-F7 - Manual (Page 41)

41 EN
SETUPS
Set the resolution of the video signal being output from
the HDMI OUT/ COMPONENT VIDEO OUT/ VIDEO OUT.
You can select the desired “Video Resolution” among the
settings listed below:
“Auto”,“480i”,“480p”,“720p”,“1080i”,“1080p”
• When you make a selection, the TV monitor temporarily
goes blank and then comes back again. If it does not,
press and hold [B (PLAY)] on the front panel for 5
seconds to change the setting back to its default.
Actual Output Resolution by Media:
• Composite video out (VIDEO OUT) can only output
480i/60.
• When outputting 24 Hz or 60 Hz signal from the HDMI
OUT, no signal will be output from the COMPONENT
VIDEO OUT and the VIDEO OUT.
• HDMI OUT cannot output 480i/60.
• COMPONENT VIDEO OUT cannot output 1080p/60.
• When HDMI cable is connected, “480i” will be grayed out.
• When HDMI cable is not connected, “1080p” will be
grayed out.
EasyLink (CEC) function allows your TV (limited to PHILIPS
brand EasyLink TV) to act in conjunction with this unit, or
vice versa.
When “EasyLink (CEC)” setting is set to “On”, functions
listed below will be available.
One Touch Play
When this unit is turned on, the TV also is turned on and
the appropriate external input channel will be selected
automatically. The appropriate external input channel
can also be selected on your TV automatically when you
press [PLAY B], [PREV
S], [NEXT T],
[the Number buttons], [HOME ], [INFO ],
[TOP MENU], or [DISC MENU / POP-UP MENU] when
the unit’s power is on.
Standby
When you press and hold [STANDBY-ON
Q]
for 2 seconds, it turns off the power of the TV first and
then turns off the power of this unit also.
System Information
Get & Set Menu Language
The unit recognizes the OSD language set for the TV and
automatically sets the same language as the player
menu language (OSD menu language) for this unit.
Refer to the “OSD Language” on page 33 for available
languages.
• This feature is available only when “Auto” is selected in
the “OSD Language” in the settings menu.
Video Resolution
HOME A “Video Setup” A “Video Resolution”
Media BD
Setting in
the “Video
Resolution”
Source
480i/60 720p/60 1080i/60 720p/24 1080p/24
480i 480i/60 480i/60 480i/60 480i/60 480i/60
480p 480p/60 480p/60 480p/60 480p/60 480p/60
720p 720p/60 720p/60 720p/60 720p/60 720p/60
1080i 1080i/60 1080i/60 1080i/60 1080i/60 1080i/60
1080p 1080p/60 1080p/60 1080p/60 1080p/60 1080p/60
Auto
The highest resolution supported by your display device
will be in effect automatically.
Media DVD DivX®
Photo
viewing
OSD-only
viewing
Setting in the
“Video
Resolution”
Source
480i/60 60,30,other
480i 480i/60 480i/60 480i/60 480i/60
480p 480p/60 480p/60 480p/60 480p/60
720p 720p/60 720p/60 720p/60 720p/60
1080i 1080i/60 1080i/60 1080i/60 1080i/60
1080p 1080p/60 1080p/60 1080p/60 1080p/60
Auto
The highest resolution supported by your display
device will be in effect automatically.
Note
• The selected resolution must also be supported by
your display device.
• If your TV and the unit is connected by a DVI cable
and if you select “Auto”, “480p” will be in effect
automatically.
• Pressing [B (PLAY)] on the front panel for 5 seconds
changes the setting back to its default.
• Refer also to your TV’s manual.
• If you select “Auto” when HDMI cable is not
connected, 480i will be output from the
COMPONENT VIDEO OUT.
EasyLink (CEC)
HOME A “Video Setup” A “HDMI Setup” A “EasyLink (CEC)”
In
tro
d
u
ctio
n
Co
nn
ectio
ns
Basi
c Setu
p
P
la
ybac
k
R
ad
io
Tun
in
g
Ot
h
e
rs
Fu
nct
ion
S
e
tup