Philips HTS5100B-F7 - Manual (Page 34)

34
LIST OF SETTINGS
EN
Category Menus/Options Description
Video
Setup Video Resolution
• Refer to page 41 for
more information.
Auto Sets the resolution of the video signal
being output from the HDMI OUT/
COMPONENT VIDEO OUT/VIDEO OUT.
• The selected resolution must also be
supported by your TV monitor.
480i
480p
720p
1080i
1080p
HDMI Setup Deep Color
• This feature is available
only when the display
device is connected by
an HDMI cable, and
when it supports Deep
Color feature.
Auto Reduces the posterization effect of the
playback picture.
“Auto”:
Reduces the posterization effect by
automatically outputting the 12 bit color
whenever the unit recognizes the
connected display device supports Deep
Color feature.
“Off”:
Outputs the standard 8 bit color.
Off
EasyLink (CEC)
• This feature is available
only when the display
device is connected with
an HDMI cable, and
when it supports
EasyLink (CEC) feature.
• Refer to page 41 for
more information.
On Sets whether to utilize the EasyLink (CEC)
function. EasyLink (CEC) function allows
your PHILIPS brand EasyLink TV to act in
conjunction with this unit or vice versa.
Off
Black Level On You can adjust the black level setting to
make the black parts of the picture
as bright as you refer.
“On”:
Makes the dark parts brighter.
“Off”:
Shows the original picture as recorded.
Off
Noise Reduction
• Not available for
BD-video.
Off Reduces the noise of the playback picture.
“Off”:
Shows the original picture as recorded.
Turns off noise reduction feature.
“Low”:
Executes MPEG noise reduction which
reduces the block noise and Mosquito
noise on the subtitle on movie by 50%
from the original picture.
“High”:
Executes MPEG noise reduction which
reduces the block noise and Mosquito
noise on the subtitle on movie by 90%
from the original picture.
Low
High