Tape operation/recording – Philips FWM70-07 User Manual
Page 23
23
English
Tape Operation/Recording
IMPORTANT!
– Recording is permissible if copyright
or other rights of third parties are not
infringed upon.
– Recording is possible only in tape
deck.
Preparation for recording
1
Press TAPE (TAPE 1•2) to select TAPE 2.
2
Load a recordable tape into tape deck 2 with
the full spool to the left.
3
Prepare the source to the recorded.
DISC – load the disc(s)
TUNER – tune to the desired radio station.
TAPE – load the prerecorded tape into tape
deck 1 with the full spool to the left.
AUX•GAME – connect external equipment.
When recording is in progress
1
Press DISC, TUNER or AUX•GAME to
select the source.
2
Start to play the selected source.
3
Press REC to start recording.
To stop recording
●
Press 9 on the system.
Disc synchro recording
1
Press DISC to select the disc.
●
Press –/+ (н/л) to select a desired track to
record.
●
You can record programmed tracks in the order
you want.
2
Press REC to start recording.
➜
“
REC” will flash, but the first 7 seconds of the
start passage will not be recorded.
Selecting another track during recording
1
Press 2; to interrupt recording.
2
Press –/+ (н/л) to select another track.
3
Press 2; to resume recording.
To stop recording
●
Press 9.
➜
Recording and disc playback will stop
simultaneously.
Dubbing tapes
1
Load the prerecorded tape into tape deck 1.
●
You can set the tape to the desired passage
where recording will start.
2
Press DUBBING.
➜
Playing and recording will start simultaneously.
●
Dubbing of tapes is possible on one side of the
tape only. To continue recording on the reverse
side, at the end of side A for example, flip the
tape to side B and repeat the procedure.
To stop dubbing
●
Press 9.