Philips FWM70-07 - Manual (Page 16)

16
English
Switching on/off
Switching to active mode
● Press CD, TUNER, TAPE or AUX/GAME.
Switching to standby mode (view clock)
● Press and hold B.
➜ The clock is displayed.
➜ While in the standby mode, pressing
CLOCK•TIMER button will switch the system
to the Eco Power standby mode.
Note:
– Before switching the system to the standby or
standby mode, make sure the demonstration mode
has been deactivated.
Demonstration mode
If the demonstration mode is active, whenever
you switch the system to the standby mode, it
will begin showing various features offered by
the system.
To activate the demonstration
In the standby mode, press and hold Ç on the
main unit until “
DEMO ON" is displayed.
To deactivate the demonstration
● Press and hold Ç on the main unit until
"
DEMO OFF" is displayed.
Setting the clock
1
2
3
4
2 5
1
Press and hold CLK/TIMER (or
CLOCK•TIMER on main unit) until “
SELECT
CLOCK OR TIMER” is displayed.
2
Press + (or ë on the remote control) to
change the display to “
CLOCK” and press CLK/
TIMER (CLOCK•TIMER) again to confirm.
3
Press 4 or ¢ (or 1 / ¡ on the
remote control) repeatedly to set the hour.
4
Press – or + (or н/л on the remote control)
repeatedly to set the minute.
5
Press CLK/TIMER (CLOCK•TIMER) to
store the setting.
➜ The clock will start working.
To view the clock time in any active
mode
● Press CLK/TIMER (CLOCK•TIMER) once.
➜ The clock is displayed for a few seconds.
Notes:
– The clock setting will be erased when the
system is disconnected from the power supply.
– The system will exit clock setting mode if no
button is pressed within 90 seconds.
Basic Operations