BT 7150 - Manual (Page 62)

Recall mode
Recall is used with some switchboard features and some
BT Calling Features.
It is pre-set to Timed Break which is correct for direct
exchange lines and most switchboards. For some
switchboards you may need to select Earth (consult your
switchboard supplier). When pulse dialling is chosen only
earth break recall is available.
To change the recall type:
1. Press MENU . Scroll to display BASE SETTINGS and
press OK .
2. Scroll to RECALL MODE and press OK .
The current setting is indicated with a ✔ . Press or
to highlight TIMED BREAK or EARTH and press OK to
confirm.
Base PIN
Your base uses a 4-digit PIN as a security code when
registering and de-registering new handsets. The default
setting is 0000.
62 Base settings
BT Freestyle 7150 – Edition 3.1 – 23.11.05 – 7130
If you experience any problems, please call the Helpline on 0870 240 3962 or email [email protected]