BT 7150 - Manual (Page 51)

2. Scroll to ANSWER SETTINGS and press OK . Scroll to
CHANGE REMOTE ACCESS PIN . Press OK .
3. Enter the current PIN (pre-set: 0000). Press OK .
4. Enter the new PIN, press SAVE . Enter it again and press
SAVE to confirm. The new PIN is saved.
5. Press to return to standby.
Switch answering machine on remotely
If you forget to switch on your answering machine, you
can do it from another phone.
Dial your phone number and let it ring. After 20 rings,
your answering machine will switch on.
Time saver
If you have set the answer delay to Time Saver, your
answering machine will answer after 2 rings if you have
new messages. If you do not have new messages it will
not answer until 6 rings. This enables you to hang up
before you are connected, saving you the cost of a call.
To set the answer delay, see page 45.
51 Using your answering machine
BT Freestyle 7150 – Edition 3.1 – 23.11.05 – 7130
If you experience any problems, please call the Helpline on 0870 240 3962 or email [email protected]