Propane cylinder safety, Cylinder storage, Connection requirements propane gas grills – Broilmaster P4-1 User Manual
Page 15
![background image](/manuals/53834/15/background.png)
Page 15
B101227-3-0408
Propane Cylinder Safety
Liquid Propane (LP) gas has a long history of safe use when the
safety precautions provided in this manual are followed.
Failure to follow these safety precautions could result in a fire
or explosion causing property damage or personal injury.
Propane gas cylinders should always be handled, stored, and trans-
ported with extreme caution in a secured upright position.
Never attempt to use or repair a propane gas cylinder that has been
damaged. Never attempt to use or repair a cylinder with a faulty or
damaged valve outlet. A cylinder that has been dropped, dented,
or otherwise damaged must be replaced.
A propane gas cylinder should never be transported in the passenger
area of a vehicle.
Keep cylinders out of direct sunlight and never apply any other
source of direct heat to them.
When refilling your cylinder, always insist on a reputable, quali-
fied gas dealer. Your propane gas cylinder is filled by weight, and
should never exceed eighty percent (80%) of its weight limit. If
the cylinder is not completely empty, the gas dealer must make
necessary adjustments to ensure it is not overfilled. Never use an
overfilled Propane gas cylinder.
Cylinder Storage
Your grill must be stored outdoors in a well ventilated area if the
cylinder is attached to it.
Disconnected cylinders must have a threaded valve plug tightly
installed and must not be stored in any building, garage, or other
enclosed area.
Flammable materials (gasoline, grill covers, etc.) must not be stored
in the cylinder enclosure.
Always store Propane cylinders in a secured upright position, out
of the reach of children.
Caution: Never use Liquid Propane (LP) gas in a grill designed
for Natural gas, or Natural gas in a grill designed for Liquid
Propane gas. Questions regarding different types of gases
should be directed to your local gas supplier.
Installation must conform to local codes or, in the absence of local
codes, with the National Fuel Gas Code, ANSI Z223.1. In Canada,
installation shall be in accordance with CAN/CGA-B149.2 Propane
Installation Code, or CAN/CGA-B149.1 Natural Gas Installation
Code, and local codes where applicable. Consult your local gas
supplier or propane gas dealer for code regulations and recom-
mended procedures.
Warning: Broilmaster
®
Premium Gas Grills require Liquid
Propane (LP) cylinders equipped with an Overfill Protection
Device (OPD). An overfilled or improperly filled Propane
cylinder can be dangerous.
Always use the pressure regulator and hose assembly supplied with
your Propane gas grill.
Note: Not all valve and cylinder combinations are compatible.
Check warning tag on valve and cylinder as well as external fit-
ting threads.
All Broilmaster
®
pressure regulators and hose assemblies require
Propane cylinders with a Type 1 connection device as illustrated.
See Figure 10.
Connection Requirements
PROPANE GAS GRILLS
Figure 10