Philips HTS3011-37 - Manual (Page 47)

47
English
Specifi cations
AMPLIFIER
Total output power:
- Home Theater mode: 200W
- FTC* output power: 120W
Frequency Response: 180 Hz – 18 kHz / ±3 dB
Signal-to-Noise Ratio: > 60 dB (A-weighted)
Input Sensitivity
- AUX 1: 400 mV
- AUX 2: 400 mV
* (1% THD 1kHz)
RADIO
Tuning Range: FM 87.5-108 MHz
(100 kHz)
26 dB Quieting
Sensitivity:
FM 22 dBf
IF Rejection Ratio: FM 60 dB
Signal-to-Noise Ratio: FM 50 dB
Harmonic Distortion: FM Mono 3%
FM Stereo 3%
Frequency Response FM 180 Hz–10 kHz / ±6 dB
Stereo Separation
FM 26 dB (1 kHz)
Stereo Threshold FM 29 dB
DISC
Laser Type Semiconductor
Disc Diametre 12cm / 8cm
Video Decoding MPEG-1 / MPEG-2 /
/ DivX 3/4/5/6, Ultra
Video DAC 12 Bits
Signal System PAL / NTSC
Video Format 4:3 / 16:9
Video S/N 56 dB
Composite Video
Output
1.0 Vp-p, 75Ω
Frequency Response 4 Hz–20 kHz (44.1 kHz)
4 Hz–22 kHz (48 kHz)
4 Hz–44 kHz (96 kHz)
PCM IEC 60958
Dolby Digital IEC 60958, IEC 61937
MAIN UNIT
Power Supply Rating: 120 V; 60 Hz
Power Consumption: 40 W
Dimensions:
460 x 55 x 332 (mm)
(w x h x d)
Weight: 2.58 kg
FRONT AND REAR SPEAKERS
System: Full range satellite
Impedance: 4 Ω
Speaker drivers: 3” full range speaker
Frequency response: 150 Hz – 20 kHz
Dimensions:
100 x 95.5 x 83.5 (mm)
(w x h x d)
Weight: 0.47 kg/each
CENTRE SPEAKER
System: Full range satellite
Impedance: 8 Ω
Speaker drivers: 3” full range speaker
Frequency response: 150 Hz – 20 kHz
Dimensions:
100 x 99.5 x 83.5 (mm)
(w x h x d)
Weight: 0.52 kg
SUBWOOFER
Impedance: 8 Ω
Speaker drivers: 165 mm (6.5”) woofer
Frequency response: 40 Hz – 150 Hz
Dimensions:
131 x 315.5 x 386 (mm)
(w x h x d)
Weight: 3.6 kg
Specifi cations subject to change without prior
notice.
1_hts3011_37_eng 3_final809.indd47 47 1_hts3011_37_eng 3_final809.indd47 47 2008-02-26 2:12:36 PM 2008-02-26 2:12:36 PM