Philips HTS3011-37 - Manual (Page 16)

16
English
C Connect the Antenna or Cable TV
service signal to the ANTENNA IN or
RF IN jack on the RF modulator. (It may
have been connected to your TV
previously. Disconnect it from the TV.)
Option 3: Using an accessory RF
modulator
If your TV has only a single Antenna Input
jack (labeled as 75 ohm or RF In,) you
need an RF modulator in order to view
the DVD playback on the TV. See your
electronics retailer or contact Philips for
details about RF modulator availability and
operations.
A Use the supplied composite video cable
(yellow) to connect the CVBS jack on
the main unit to the video input jack on
the RF modulator.
B Use an RF coaxial cable (not supplied) to
connect ANTENNA OUT or TO TV jack
on the RF modulator to the ANTENNA
IN jack on the TV.
Antenna
Basic Connections
(continued)
Back of RF Modulator
(example only)
Main Unit (rear)
1_hts3011_37_eng 3_final809.indd16 16 1_hts3011_37_eng 3_final809.indd16 16 2008-02-26 2:12:31 PM 2008-02-26 2:12:31 PM