42 turbo timer, Helpful hints – Philips VR660BPH User Manual
Page 42
3
The START time will continue to appear on the display panel. To
set the STOP time, press the PLAY 8 or STOP 9 button.
Every time you press a button, the stop time changes in one-
minute increments. If you press and hold a button, the stop time
changes in 30-minute increments. When the correct STOP
time appears, press the OK/STATUS button.
2-4
1
This function allows you to set a timer recording without using
the on-screen menus. Complete each step within one minute of
the previous step. Use Turbo Timer to set a timer recording with-
in the next 24 hours only.
1
Press the TURBO TIMER button on the remote control.
The current time will appear on the display panel. (It will not
appear on the TV screen.)
If “Err” (error) appears, either the clock is not set or you have set
eight timer recordings already. The VCR will not let you set more
than eight timer recordings.
4
The current channel number will appear on the display panel. To
select the channel you want to record, press the PLAY 8
or STOP 9 button. Every time you press a button, the channel
changes once. If you press and hold the button, the channels will
change rapidly. When the correct channel number appears,
press the OK/STATUS button.
42 Turbo Timer
• The Program Overlap Warning does
not function with Turbo Timer. The
timer recording with the earliest start
time will record. Then, the remaining
portion of the later recording will
record.
• To exit Turbo Timer mode at any time,
press the TURBO TIMER button.
• DAILY or WEEKLY timer recordings
can not be set with Turbo Timer.
• Tape speed can be selected at any
time during steps 2-4 by pressing the
ALT/SPEED button.
• If you are using a DBS with the
Controller, and have selected a channel
number which is between 100-199,
you need to specify whether the chan-
nel is for Cable TV or Satellite TV
(DBS). Press the Number 0 (DBS) but-
ton repeatedly to select either the DBS
mode (“D” indicator appears on the
display panel), or CABLE/TV (no indica-
tor display appears next to channel
number) for the proper channel mode.
Helpful Hints
5
The normal display will appear, and the r light will appear on the
display panel. The program slot in which the Turbo Timer will be
stored will appear on the display briefly. For example, P:6 means
the Turbo Timer will be stored in slot six. Details are on page 43.
VCR
TV
VCR/TV
QUICK PROGRAMMING
POWER
STILL/SLOW
SMARTPICTURE
CH
VOL
OK/STATUS
TIMER
TURBO
REC END
MENU
-
+
CBL / DBS
1
2
3
4
5
6
7
8
9
START
STOP
DATE
DBS
DAILY
PLAY
REW
FF
STOP
WEEKLY
/OTR
REC
REC
-
+
-
+
SPEED
0
CLEAR
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
..
..
..
..
..
..
..
..
SEARCH
MUTE
TIMER
AUDIO/
SKIP
SEARCH
EJECT
ALT
-
-
2
To set the START time, press the PLAY 8 or STOP 9
button until the desired start time appears on the display
panel. Every time you press a button, the start time changes in
one-minute increments. If you press and hold a button, the start
time changes in 30-minute increments.
When the correct START time appears, press the
OK/STATUS button.
VCR
SLP
VCR
SLP
VCR
SLP
VCR
SLP