Philips 740815008 - Manual (Page 33)

ENGLISH
This function enables the user to see how many coffees the
machine has already dispensed.
TOT
AL
COFFEE
PROGRAMMING MACHINE FUNCTIONS
TOTAL COFFEES *
TIMER
TOTAL COFFEES
86
This is a factory-set function that automatically switches the
machine into “Standby” when 3 hours have elapsed since a
coffee was dispensed. TIMER
TIMER *
CLOCK
STANDBY
AFTER 3:00
STANDBY
AFTER 1:15
RINSING CYCLE
RINSING CYCLE *
FACTORY SETTINGS FILL WATERTANK
The switch-off time can be adjusted, in 15-minute intervals,
to a minimum of 15 minutes; the function cannot be
deactivated.
TOTAL COFFEES
86
RINSING CYCLE
The display will show the
number of coffees the
machine has dispensed.
Press “ESC” to exit the
menu.
When the function ap-
pears, select it using the
“OK” button.
Use the buttons to adjust
the timer setting.
When the function ap-
pears, select it using the
“OK” button.
Press the “OK” button to
confirm your choice.
This function is used to rinse all the coffee-dispensing parts
with water.
The rinsing cycle cannot be interrupted.
A person must be present during this operation.
Warning: a large quantity of water may be discharged from the
coffee brew unit. Before starting, empty out the drip tray and
keep an additional container handy.
The machine will carry out
a rinsing cycle.
When the cycle is
completed this message
will be displayed:
When the function ap-
pears, select it using the
“OK” button.
33