Philips 740815008 - Manual (Page 30)

PROGRAMMING MACHINE FUNCTIONS
PROGRAMMING
ST
ART
ENERGY SA
VING
RINSING
The user can change some machine operating parameters to suit his/her personal needs.
Press the “MENU” button
to access the programming
mode.
Use the “∧” and “∨”
buttons to display/change
the menus.
Using the “OK” button you can
select the menu item marked
with an “*”
Press ESC to exit without
making any changes.
Use the “OK” button to
select a menu or confirm
a change.
The display will show
that the machine is in the
standby mode.
Press the “OK” button to
restore the machine to
normal operation.
When this function is enabled, the internal machine circuits
will be rinsed immediately after the warming-up phase to
ensure that coffee is prepared with fresh water only.
From this menu you can
disable the function.
When the appliance is used infrequently, it can be switched
to the STANDBY mode.
With this function you can cut energy costs.
When the function ap-
pears, select it using the
“OK” button.
In all new appliances this function has already been enabled
in the factory.
Press the “OK” button to
confirm your choice.
When the function ap-
pears, select it using the
“OK” button.
RINSING *
LANGUAGE
ENERGY SAVING
RINSING *
LANGUAGE
RINSING
ON
RINSING
OFF
RINSING
ON
RINSING
ON
SELECT PRODUCT
READY FOR USE
ENERGY SAVING *
RINSING
RINSING *
LANGUAGE
ENERGY SAVING *
RINSING
30