Philips SA4VBE04KF-37 - Manual (Page 27)

25 EN
12 Troubleshooting
If VIBE is not working properly or the display
freezes, you can reset it without losing data:
How do I reset VIBE?
• Insert a pen tip or other object into the
reset hole on VIBE. Hold until the player
shuts down.
• If the reset option is unsuccessful, recover
VIBE through Philips Device Manager:
1
On your PC, launch Philips Device
Manager.
2
Enter the recovery mode:
a
Switch off VIBE.
b Press and hold the volume button ,
and then, connect VIBE to your PC.
c Keep holding the button until Philips
Device Manager recognizes VIBE and
enters the recovery mode.
3
Start the recovery process:
a
On Philips Device Manager, click the
Repair button. Follow the onscreen
instructions to complete the recovery
process.
b When the recovery is completed,
disconnect VIBE from your PC.
4
Restart VIBE.