Philips SA4VBE04KF-37 - Manual (Page 11)

9 EN
3 Get started
Charge power
VIBE has a built-in battery that can be charged
through the USB socket of a computer.
Connect VIBE to a PC by using the USB cable.
Note
•
When you connect VIBE to a computer, you are briefly
prompted to select: [Charge & transfer] or [Charge
& play].
• VIBE automatically applies [Charge & transfer], if no
new selection is made.
Battery level indication
• When the battery is low, the low battery
screen is displayed repeatedly.
• When the charging process is complete,
is displayed.
Note
• Rechargeable batteries have a limited number of charge
cycles. Battery life and number of charge cycles vary by
use and settings.
Charge through a USB AC/DC
adapter
To charge VIBE through a USB AC/DC adapter
(not supplied), make sure that the power
output is 5.0 V and 0.5A.
Switch the player on or off
Press and hold until the player is switched
on or off.
Automatic standby and shut-down
The player has an automatic standby and shut-
down feature that can save battery power.
After 5 minutes in idle mode (no play, no
button is pressed), the player switches off.