Blaupunkt CD35 7 645 060 510 - Manual (Page 19)

40
Cancelling SCAN
To stop scanning,
➮
briefly press the MENU button
8
.
The currently scanned track will then
continue to be played normally.
Note:
●
You can set the scanning time. For
further details, please read the sec-
tion entitled “Setting the scanning
time” in the “Radio mode” chapter.
Pausing playback (PAUSE)
➮
Press button 3
:
.
“PAUSE” appears in the display.
Cancelling pause
➮
Press button 3
:
whilst pause
is activated.
Playback is resumed.
CLOCK time
Displaying the clock time
To display the clock time briefly,
➮
Press and hold down the SRC
button
2
until the clock time ap-
pears in the display.
Setting the clock time
To set the clock time,
➮
press the MENU button
8
.
➮
Press the or button
7
repeat-
edly until “CLOCK SET” appears in
the display.
➮
Press the button
7
.
The clock time appears in the display.
The hours flash and can be adjusted.
➮
Adjust the hours using the / but-
tons
7
.
Once the hours are set,
➮
press the button
7
.
The minutes flash.
➮
Adjust the minutes using the /
buttons
7
.
➮
Press the MENU button
8
twice.
Selecting 12/24-hour clock
mode
➮
Press the MENU button
8
.
“MENU” appears in the display.
➮
Press the or button
7
repeat-
edly until “24 H MODE” or “12 H
MODE” appears in the display.
➮
Press the or button
7
to
switch between the modes.
CD-CHANGER MODE CLOCK TIME