Blaupunkt CD35 7 645 060 510 - Manual (Page 16)

37
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
PORTUGUÊS
“RPT OFF” appears briefly in the dis-
play and the RPT symbol disappears.
Normal playback is then resumed.
Pausing playback (PAUSE)
➮
Press button 3
:
.
“PAUSE” appears in the display.
Cancelling pause
➮
Press button 3
:
whilst pause
is activated.
Playback is resumed.
Configuring the display
You can choose between two display
types for CD mode:
●
Track number and clock time
●
Track number and playing time
➮
Press the MENU button
8
.
➮
Press the or button
7
repeat-
edly until “CD DISP” appears in the
display.
➮
Press the or button
7
to
switch between “PLAY TIME” and
“CLOCK”.
➮
Press the MENU button
8
twice.
Traffic announcements in CD
mode
If you wish to receive traffic announce-
ments whilst CD mode is activated,
➮
press the TRAF button
6
.
Traffic announcement priority is active
when the traffic-jam symbol lights up in
the display. For further details, please
read the “Traffic information reception”
chapter.
Cancelling MIX
➮
Press the 5 MIX button
:
again.
“MIX OFF” appears briefly in the dis-
play and the MIX symbol disappears.
Scanning tracks (SCAN)
You can scan (briefly play) all the tracks
on the CD.
➮
Press and hold down the MENU
button
8
for longer than two sec-
onds.
The next track will then be scanned.
Note:
●
You can set the scanning time. For
further details, please read the sec-
tion entitled “Setting the scanning
time” in the “Radio mode” chapter.
Cancelling SCAN and continuing
listening to a track
➮
To cancel scanning, press the
MENU button
8
.
The currently scanned track will then
continue to be played normally.
Repeating tracks (REPEAT)
If you want to repeat a track,
➮
press the 4 RPT button
:
.
“RPT TRCK” appears briefly in the dis-
play and the RPT symbol lights up. The
track is repeated continuously until you
deactivate RPT.
Cancelling REPEAT
If you want to cancel the repeat func-
tion,
➮
press the 4 RPT button
:
again.
CD MODE