Blaupunkt CD35 7 645 060 510 - Manual (Page 14)

35
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
PORTUGUÊS
Traffic information
Your device is equipped with an RDS-
EON receiver. EON stands for En-
hanced Other Network.
Whenever a traffic announcement (TA)
is broadcast, the system switches au-
tomatically from a station that does not
provide traffic reports to the appropri-
ate traffic information station within the
broadcasting network that does.
Once the traffic report has been played,
the system will switch back to the pro-
gramme you were listening to before.
Switching traffic information
priority on/off
➮
Briefly press the TRAF button
6
.
Traffic announcement priority is active
when the traffic-jam symbol lights up in
the display.
Note:
You will hear a warning beep:
●
if you leave the reception area of a
traffic information station that you
are currently listening to.
●
if you are receiving a traffic infor-
mation station and the volume is
set to minimum (0) or if, whilst lis-
tening to a CD, a CD in the chang-
er or an AUX source, you leave the
reception area of the tuned traffic
information station and the subse-
quent automatic search cannot find
a new traffic information station.
●
if you retune the radio from a traffic
information station to a station that
does not broadcast traffic informa-
tion.
If you hear the warning beep, you can
either switch off traffic information pri-
ority or tune into a station that broad-
casts traffic information.
Setting the volume for traffic
announcements
➮
Press the MENU button
8
.
➮
Press the or button
7
repeat-
edly until “TA VOLUME” appears in
the display.
➮
Adjust the volume using the
buttons
7
.
When you have finished adjusting the
setting,
➮
press the MENU button
8
twice.
Notes:
●
You can use the volume control
4
to adjust the volume during a traffic
announcement for the duration of
that announcement.
●
You can set the volume distribution
for the traffic announcements. For
further details, please read the
“Sound” chapter.
TRAFFIC INFORMATION