Philips 107T56-99 - Manual (Page 39)

Frequently Asked Questions
49. Why is there no picture on my monitor even though the power LED is green?
●
Verify the Contrast and Brightness setting of the monitor. First press and hold the
5
(-) button to
increase Contrast and then press and hold the
4
(+) button to increase Brightness. These buttons
are located on the front of your monitor.
●
Press both the
5
(-) button and the OK button at the same time to switch input A|B.
●
Try and repeat step 48 above.
50. Why does the picture disappear after I press the on/off button quickly?
This is a unique Philips feature designed to preserve the life of your monitor. Please allow 5 seconds
between powering off and on your monitor, your picture will then be restored.
file:///D|/EDFU/crt_17_5/edoc/ENGLISH/FAQ.HTM (14 of 14)7/15/2004 5:51:44 PM