Philips 107T56-99 - Manual (Page 14)

107T Product Information
Exit this OSD.
After this, please don't change the brightness or contrast setting of your monitor. If you change
either of these, the monitor will exit the sRGB mode and go to a color temperature setting of
6500K.
For more information on sRGB, please visit: www.srgb.com
* These information are subject to change without notice.
RETURN TO TOP OF THE PAGE
Automatic Power Saving
If you have VESA's DPMS compliance display card or software installed in your PC, the monitor can
automatically reduce its power consumption when not in use. And if an input from a keyboard,
mouse or other input device is detected, the monitor will automatically "wake up". The following table
shows the power consumption and signaling of this automatic power saving features:
Power Management Definition
VESA's
Mode
Video
H-
sync
V-
sync
Power Used Power Saving (%) LED color
ON Active Yes Yes Typical 68 W 0 % Green
OFF Blanked No No < 1W 99%
Flashing
Green
This monitor is E NERGY S TAR
®
compliant. A s an E NERGY S TAR
® P artner, PHILIPS has
determined that this product meets the E NERGY S TAR ® guidelines for energy efficiency.
file:///D|/EDFU/crt_17_5/edoc/ENGLISH/107T/PRODUCT/PRODUCT.HTM (9 of 12)7/15/2004 5:51:39 PM