Philips 60PP940199 - Manual (Page 27)

27
2
1
3
TUNER A
2 1 3
5 4 6
8 7 9
0
HELP FORMAT LIGHT
TV
SOURCE
DVD
SWAP PIP CH
– +
SOURCE FREEZE
PIP POSITION
VOL CH
SURF A/CH
PIP ON/OFF
STATUS/
EXIT
MENU/
SELECT
VCR ACC
TUNER B FRONT
AV1 AV2 AV3 AV4
4
5
OUTPUT
V L R
R
EAR
P
ANEL
J
ACKS
VCR OR L ASERDISC
F ollow the steps shown here to
connect a stereo VCR or
stereo laserdisc player.
Connect the cable from the
VIDEO OUT of the VCR or the
laserdisc player to the TV’s AV
(VIDEO) jack.
Connect the cable from the
AUDIO OUT R of the VCR or the
laserdisc player to the AV
(AUDIO/R) jack.
Connect the cable from the
AUDIO OUT L of the VCR or the
laserdisc player to the AV
(AUDIO/L) jack.
Press the SOURCE button
until you access the input source to
which you have connected the VCR
or laserdisc player.
Press the SOURCE button
until you return to the previous
channel. Or press the A/CH button
to return to the previous channel.
TV’s Rear Panel
VCR or Laserdisc
Player
Back of VCR
or Laserdisc
Player
✔
Completely insert the connec-
tion cord plugs when hooking up
the Rear Panel jacks. The picture
and sound that are played back will
be abnormal if the connection is
loose.
✔
A single VCR can be used for
VCR #1 and VCR #2. Note, how-
ever, that a VCR cannot record its
own video or line output. (See the
setup on page 26.) Refer to your
VCR operating guide for more
information on the line input–out-
put connections.
CHECK IT OUT
NOTE: If your VCR
or laserdisc player is
monaural (mono),
connect its audio
output jack to the
TV’s AUDIO/L jack.