beautypg.com

Anel, Acks – Philips 60PP940199 User Manual

Page 26

background image

26

R

EAR

P

ANEL

J

ACKS

T

YPICAL

F

ULL

-

FEATURE

S

ETUP

T

his section will help you use the
Rear Panel jacks. The illustration

shows full use of the connection
options. See the tips here for guidance.

Tips on Rear Panel Connections

S-Video connections are provided for

high performance laserdisc players, VCRs,
and such that have this feature. Use these
connections in place of the standard video
connection if your device has this feature.

If your device has only one audio output

(mono sound), connect it to the left audio
jack on the television.

Refer to the operating guide of your other

electronic equipment for additional informa-
tion on connecting your hookup cables.

A single VCR can be used for VCR #1 and

VCR #2, but note that a VCR cannot record
its own video or line output. Refer to your
VCR operating guide for more information
on line input–output connections.

You may use either VIDEO or S-VIDEO

output (but not both at the same time) to
connect to the AV 1, AV 2, or Front input.
You may use VIDEO or COMPONENT:
Y-PbPr output (but not both at the same
time) to the connect to the AV 3 or AV 4
input.

Connect only one accessory device (VCR,

DVD player, camcorder, etc.) to each input
jack.

COMPONENT Y-PbPr connections are

provided for high performance accessory
devices, such as DVD players. Use these
connections in place of the standard video
connection if your device has this feature.

When using the Y-PbPr input jacks, con-

nect your accessory device’s audio output to
the TV’s AV 3 or AV 4 Left and Right Audio
input jacks.

Your accessory device’s outputs may be

labeled Y, B-Y, and R-Y. In this case, con-
nect the device’s B-Y output to the TV’s Pb
input and the device’s R-Y output to the
TV’s Pr input.

Your accessory device’s outputs may be

labeled Y-CbCr. In this case, connect the
accessory device’s Cb output to the TV’s Pb
input and the device’s Cr output to the TV’s
Pr input.

It may be necessary to adjust Tint to

obtain optimum picture quality when using
the Y-PbPr inputs.

To ensure no copyright infringement, the

MONITOR OUT output will be abnormal
when using the Y-PbPr jacks.

Outside Antenna or Cable

TV Coaxial Cable

Two-way Signal

Splitter

Cable TV Box

VCR #1

DVD Player

VCR #2

Optional

S-VIDEO

Cable

Optional

S-VIDEO

Cable

HDTV

Set-top Box

Laserdisc

Player, VCR,

Camcorder,

etc.

Optional

S-VIDEO

Cable

Stereo System

Amplifier

Connect only one accessory

device to each input jack.

Follow connections that pertain

to your personal entertainment sys-
tem.

CHECK IT OUT

TV’s Rear Panel