Radio mode (lfh0884, lfh0898 only), Auto tune radio stations, Manually tune to a radio station – Philips LFH0884-00 User Manual
Page 16: Play a preset radio station, Delete a preset radio station
16
Radio mode (LFH0884, LFH0898 only)
5
To exit the radio mode, press and hold the l
/ MENU
button for 1
second or longer.
D
Note
Press the
j
/ DEL
button while the recorder is in radio mode to switch
between stereo and mono reception.
7.3 Play a preset radio station
1
Press the
INDEX /
a
button while the recorder is in radio mode to
switch between frequency and preset mode.
2
In preset mode, press the h or b button to change to another
preset radio station.
3
Adjust the volume using the
+ and – buttons.
4
To exit the radio mode, press and hold the l
/ MENU
button for 1
second or longer.
7.4 Delete a preset radio station
1
Press the
INDEX /
a
button while the recorder is in radio mode to
switch between frequency and preset mode.
2
In preset mode, press the h or b button to select the preset
radio station to be deleted.
3
Press and hold the j
/ DEL
button for 1 second or longer to delete
the preset radio station.
7
Radio mode (LFH0884, LFH0898 only)
1
Connect the headphones. The supplied headphones serve as a radio
antenna.
2
Press and hold the l
/ MENU
button for 1 second or longer to
enter the radio mode.
D
Note
The radio can also be turned on and off in menu (see chapter 8,
Customize settings on page 18 for more information).
7.1 Auto tune radio stations
1
Press the l
/ MENU
button to open the menu.
2
Press the
+ or – button to select R.
3
Press the k button to enter the sub-menu
4
Press the
+ or – button to select
AUTO
.
5
Press the k button to confirm. The radio automatically tunes radio
stations and saves the frequencies to presets. The radio can store up
to 20 radio stations to presets.
7.2 Manually tune to a radio station
1
To fine-tune frequency, quickly press the h or b button.
2
To search for the next stronger signal, press and hold h or b.
3
Press the k button to save the frequency under a preset.
4
Adjust the volume using the
+ and – buttons.