Buffalo Technology WLA-G54 - Manual (Page 4)

4
Step  Configure your computers IP address
Refer to your Operating System for further instructions on how to navigate
to your TCP/IP Properties.
For Windows 98SE/ME
- Right-click on Network Neighborhood or My Network Places
and
select
Properties.
- Select the Configuration tab, scroll down to TCP/IP and press Properties.
- Click
Specify an IP address
- IP address = 192.168.11.2
- Subnet mask = 255.255.255.0
- Click OK to close Internet Protocol (TCP/IP) Properties.
- Click OK to close Network Connection Properties.
- Close Network Connections window.
For Windows 2000/XP
- Click Start => Settings => Control Panel => Network
Connections.
- Right-click on
Local Area Network Connection and select
Properties.
- Scroll down to
Internet Protocol (TCP/IP ) and press Properties.
- Select Use the following IP address
- IP address = 192.168.11.2
Step  Access the AirStation configuration page
Launch your Web browser and type 192.168.11.1 in the address field of the Web
browser window and click “ Go” or press “Enter.”
If you have previously modified the AirStation and changed the LAN IP address,
enter the custom LAN IP address to access the AirStation configuration page.