beautypg.com

Step, Wired configuration – Buffalo Technology WLA-G54 User Manual

Page 2

background image

2

Deciding on a Mode for Initial AirStation

Configuration

Wired Connection (recommended)

Wireless Connection

Do not connect the AirStation to your existing network

Step

Connect your computer to the AirStation

Buffalo recommends using a wired connection, meaning your computer is physically
connected to the

AirStation with a CAT5 cable plugged into any one of the

four 10/100M Ethernet LAN port. This type of setup will eliminate possible setup
problems due to any issues with the wireless adapter on the computer being used
to configure the

AirStation.

A Web browser version 4.5 or later should be used to configure the

AirStation.

Using the provided CAT5 Ethernet Cable, connect one end into any one of the
four (4) 10/100M Ethernet ports on the AirStation and the other to your comput-
er’s available Ethernet port. Figure shown above.

Wired Configuration