Philips 4 HD SMALL CLOCK VCR - Manual (Page 14)

REW
PLAY
POWER
VCR PLUS+
/ENTER
SPEED
VCR
TIME SEARCH
TV
MUTE
CABLE
/DSS
VCR/TV
CHANNEL
VOLUME
REC/OTR
STATUS/EXIT
MEMORY SLOW PAUSE/STILL
MENU CLEAR EJECT
STOP
F.FWD – +
1 2 3
4 5 6
7 8 9
0 +100
14 Setting the Clock
2
Press the MENU button to bring up the main menu display.
There are two ways to set the clock. With manual clock setting,
you tell the VCR the current time. With automatic clock setting,
the VCR gets the current time from your local PBS station. It
keeps track of the time by constantly referring to the time broad-
casted by your PBS station.
If you are using a Cable Box, you must set the clock man-
ually.
Follow the instructions under either manual clock setting or auto-
matic clock setting (page 16) to set the VCR’s clock. Before you
begin, make sure:
● The VCR is hooked up and turned on, and channels are pro-
grammed into the VCR’s memory (see pages six - 12).
● The VCR is in VCR position. (The VCR light will appear on the
display panel. If it does not, press the VCR/TV button once.)
● You make each entry within 60 seconds of the previous entry.
(If you do not, you may start again at step 1.)
TO SELECT PUSH NO. SHOWN
1 PROGRAM
2 VCR SET UP
3 TUNER SET UP
4 SET CLOCK
TO END PUSH EXIT
3
Press the Number 4 button to select SET CLOCK.
SET CLOCK
1 AUTO CLOCK [ON]
2 SET MANUAL CLOCK
3 DAYLIGHT SVG TIME [ON]
4 SET TIME ZONE
(AUTO)
CABLE BOX USERS
SET CLOCK MANUALLY
TO SELECT PUSH NO. SHOWN
TO END PUSH EXIT
• To display the time, press the STA-
TUS/EXIT button. A status display,
which includes the time, will appear
on the TV screen for about five sec-
onds. For details, see “On-Screen
Status Displays” on page 24.
• If you press the STATUS/EXIT but-
ton while you are setting the clock,
the TV screen will return to the pro-
gram you were watching. If this
happens, start over.
• Power failures that last for more
than one minute can cause you to
lose your clock setting if you set the
clock manually. If this happens,
reset the clock.
Helpful Hints
Manual Clock Setting
4
Press the Number 2 button to select SET MANUAL CLOCK.
TIME – – : – –
DATE – – / – – /– –
TO END PUSH EXIT
2
3
4
1
Press the VCR button.
1