Philips 4 HD SMALL CLOCK VCR - Manual (Page 12)

REW
PLAY
POWER
VCR PLUS+
/ENTER
SPEED
VCR
TIME SEARCH
TV
MUTE
CABLE
/DSS
VCR/TV
CHANNEL
VOLUME
REC/OTR
STATUS/EXIT
MEMORY SLOW PAUSE/STILL
MENU CLEAR EJECT
STOP
F.FWD – +
1 2 3
4 5 6
7 8 9
0 +100
12 Channel Memory
2
Press the MENU button to bring up the main menu display.
TO SELECT PUSH NO. SHOWN
1 PROGRAM
2 VCR SET UP
3 TUNER SET UP
4 SET CLOCK
TO END PUSH EXIT
• You can not enter the TUNER SET
UP menu when you are in Line
Input mode.
• Line Input mode will always be
stored in the VCR’s memory as
channel 001 or 002. When you
select channel 001 or 002 with the
CHANNEL (Up/Down) buttons or
the Number buttons, AV REAR or
AV FRONT will appear on the
screen briefly.
• You may not be able to program
channels if you are using a Cable
Box. See pages eight-nine for
details.
• To switch between TV and CABLE
TV selection, repeat the steps on
this page.
Helpful Hints
Programming Channels
Although your VCR may automatically memorize the channels you
receive when you turn it on for the first time, this function lets
you reprogram channels.
3
Press the Number 3 button to select TUNER SET UP.
TO SELECT PUSH NO. SHOWN
1 TV
2 CABLE TV
ON
3 AUTO PROGRAMMING
4 ADD/DELETE CH
5 CH MEMORY REVIEW
TO END PUSH EXIT
4
Press the Number 1 button to select TV (if you have an
antenna) or the Number 2 button to select CABLE TV (if you
have a cable connection). ON will appear to the right of your
choice.
5
Press the Number 3 button to select AUTO PROGRAM-
MING. MEMORIZED CHANNEL / PLEASE WAIT will appear on-
screen. The VCR will place all the channels you receive into its
memory.
6
Wait for a few minutes while the VCR programs chan-
nels. When programming is complete, CHANNELS ARE SET will
appear on-screen. Then the programming of the lowest channel
number placed in the VCR’s memory will appear on-screen. Now
when you press the CHANNEL (Up/Down) buttons, you will scan
only through channels you receive.
2
3&5
1
Press the VCR button.
1
4