Bay Technical Associates V79 PDI-1 - Manual (Page 35)

31
NOTE: Multiple configuration commands may be sent while the PDI is in
command mode. Each command should be terminated with a Carriage Return.
5.2.1 DEBOUNCE DELAY COMMAND
The Debounce Delay (DB) command programs the PDI Debounce Delay time (see
Section 4.2.2 and Section 5.1.3). The Debounce Delay command has the
following format:
DBn
where n = 0 to 65535 milliseconds.
5.2.2 REPORTING METHOD COMMAND
The Reporting Method (RM) command programs the PDI Reporting Method (see
Section 4.2.2.1 and Section 5.1.4.1). The Reporting Method command has the
following format:
RMn
where n = 1 to 3. 1 = Command, 2 = Immediate and 3 = Schedule.
5.2.3 TIME TAG COMMAND
The Time Tag (TT) command is used to enable or disable time tagging as
described in Section 4.2.2.5 and Section 5.1.4.5. The Time Tag command has the
following format:
TTn
where n = 1 or 2. 1 = enable and 2 = disable.