Bay Technical Associates V79 PDI-1 - Manual (Page 16)

12
4.3.1 CLEAR EVENT BUFFER COMMAND
The Clear Event Buffer (CB) command is used to clear all stored event samples
from the buffer of the selected channel(s). The Clear Event Buffer command has
the following format:
CBn
where c = Channel# (1 to 16 or 0 for all).
4.3.2 CLEAR EVENT COUNTER COMMAND
The Clear Event Counter (CC) command is used to reset the event counter for one
or more channels to zero without reading the value of the event counter. The
function of the event counters is discussed in Section 4.4. The Clear Event
Counter command has the following format:
CCc
where c = Channel# (1 to 16 or 0 for all).
4.3.3 CLEAR EVENT LATCH DATA
The Clear Event Counter (CR) command is used to clear the event latch buffer.
Latched data is discussed more in Section 4.4. The Clear Event Counter command
has the following format:
CRc
where c = Channel# (1 to 16 or 0 for all).