Philips flat HDTV 47PFL7432D 47" LCD integrated digital with Perfect Pixel HD Engine and Ambilight 2 channel - Manual (Page 35)

33
ENGLISH
Annex 3 - Issues referring to connected accessory devices with a HDMI or
Component Video output connector
The HDMI IN and Component Video connectors allow the following TV and monitor modes:
HD Standard Definition TV (SDTV) 640x480i 60 Hz
720x480i 60 Hz
720x576i 50 Hz
Enhanced Definition TV (EDTV) 640x480p 60 Hz
720x480p 60 Hz
720x576p 50 Hz
High Definition TV (HDTV) 1920x1080i 50/60 Hz
1920x1080p 24/25/30/35/60 Hz
1280x720p 50/60 Hz
The HDMI IN connectors allow the following PC modes:
PC 640x480 60 Hz
800x600 60 Hz
1024x768 60 Hz
1280x768 60 Hz
1360x768 60 Hz
1920x1080 60 Hz
- If necessary, you can adjust the picture position to the center of the screen with the cursor buttons.
- Due to legal requirements, it is possible that with certain copy protected PCM audio qualities from a an accessory device connected to
the HDMI input, the Digital audio output signal is muted.
- Proper working is only guaranteed with HDMI compliant consumer products. Limit the cable length to maximum 5 m.
- In case no signal is detected from your HDMI devices, turn off the HDMI device and then on again.